Custom plastic parts
Custom Plastic Covers
Lids, access covers, vented plates and blanking covers milled from flat plastic sheet with every cutout you need. Stocked in many colors and gauges from 2 mm to 1 inch, painted or printed to match the product, and made without a mold.
Custom plastic covers manufacturer
Custom plastic covers, milled flat with any cutout you can draw.
A custom plastic cover is milled on a flat sheet of plastic and comes with any custom cutouts you have: vent patterns, connector openings, fan holes, countersunk fastener holes, a window recess. Toolless stocks a wide range of plastic in many colors and many gauges, from 2 mm to 1 inch, so the cover can be a thin lid on a handheld or a thick plate on a machine.
We have also partnered with a painter to widen the range of colors beyond stocked sheet, and we print your logo on any custom cover, panel, bezel or display with our digital printer. Covers ship on their own or as part of a custom plastic enclosure.

Types of cover
From a blanking plate to a hinged access door.
The CNC router does not care what the cover is for. These are the versions we build most.
Vented covers
Machined slot patterns with a 2 mm minimum slot width. Slots cost less than holes, and cross supports stay in on long patterns so the cover keeps its stiffness.
Access covers
Slide-in covers that need no fasteners, held by a frame or an undercut, or screwed covers with brass inserts in the frame for repeated service.
Window covers
A cover with an acrylic window solvent-bonded into a recess from behind, flush or chamfered, for displays and indicators.
Blanking and thick plates
Plain covers that close an opening, and thick machined plates up to 1 inch that act as a base, a mounting block or a wear surface.
Finish
Color from the sheet, paint from our partner, graphics from the printer.
Stocked ABS comes pre-colored and pre-textured in white, black, light grey and dark grey, so most covers need no finishing at all. When a product calls for a specific color, our painting partner sprays the cover after machining, and for volume orders we can have sheet color-matched at the mill.
- Full-color digital printing of logos, legends and safety marks directly on the cover
- Engraving for permanent part numbers and labels
- Recesses for labels, nameplates and overlays, sized to hide machine marks
- Colored acrylic caps bonded on as a decoration that needs no paint

Design notes
Rules of thumb for a machined cover.
Covers are machined from one side wherever possible, which keeps the price down. The figures come from our tolerances and functional features pages.
- Sheet gauge
- 2 mm to 1 inch
- Machining tolerance
- ±0.2 mm (.008”); ±0.4 mm between reverse-side and front-side features
- Cutters
- 2 mm single-flute carbide for most work, 3 mm and 6 mm for large openings and pockets
- Vents
- 2 mm minimum slot width; holes cost more than slots
- Pockets
- Machined, or through-cut with an insert from the back for pockets over about 9 square inches
- Countersinks
- Added as a post operation or machined by CNC
- Edges
- 1, 2 and 3 mm radii standard; chamfers up to 6 mm
- Materials
- ABS, flame-retardant ABS, Boltaron, polycarbonate, PETG, acrylic (materials selection)
Examples
Covers and plates we have machined.
More in the plastic parts gallery.
How to order
Three steps from drawing to cover.
Send the outline
A DXF or STEP of the cover with cutouts, or the opening it closes, plus material, gauge, color and quantity.
Approve the model
An engineer returns the machined pattern with inserts, recesses and printing placed, for approval before cutting.
Prototype, then run
One cover to check fit, then production from the same program in any quantity, with reorders through the blanket order program.
More custom plastic parts
Made from the same sheet, on the same machines.
Custom plastic panels
Flat front and rear panels with cutouts, printed legends and mounting holes.
Learn moreBezels and shrouds
Front bezels and folded shrouds with reinforced bends and printed branding.
Learn moreCustom plastic brackets
Bent or flat brackets and shields with inserts and standoffs.
Learn moreContainers and bins
Trays, drip pans and storage bins sized to your rack.
Learn morePlastic parts gallery
Plates, bezels, brackets and panels we have machined for customers.
See the galleryCustom plastic enclosures
The complete housing the cover closes, built without a mold.
Learn moreWhy engineers choose Toolless
Trusted for enclosures since 1998.
Startups, OEMs and medical device makers across the USA, Canada and Australia come back for the next run. Read more testimonials.
- Years without molds
- 25+
- Certified quality system
- ISO 9001
- Units per order
- 1–10,000
- Sq ft in Everett, WA
- 13,000
“We initially considered injection molding, but with our volume the cost of tooling would never be recovered. It took only a week to settle on a design and get a prototype, and we were in production a week later.”
“I spent 9 years as a quality engineer at Rockwell and tend to be a perfectionist. Your professionalism and diligence in helping evolve our cover is greatly appreciated.”
“After a number of orders, Toolless have become our preferred supplier. Even though we are located in Australia, all deliveries have been fast and hassle free.”
Start your enclosure
Send the board. We’ll send the box.
Quotes come from an engineer, not a form robot. Attach CAD, photos or a sketch and we reply within one business day.



